How To Light A Pilot Light On A Goodman Furnace. Once the gas has had time to dissipate, turn the knob to pilot. then, hold down the reset button and bring the flame of a long lighter close to the pilot light opening. To locate the pilot light on a gas furnace, you first have to remove the access cover, which usually just lifts off.
This is usually a white or red plastic knob that is on top of the main gas valve. Gas furnace repairs in bend, or I've never seen a furnace like this.
Did You Check The Furnace's Filters?
Subsequently, one may also ask, where is the pilot light on my furnace? Have a goodman furnace (gas). The ignition button will usually will have a small red button next to it.
Relight The Pilot Light With The Ignition Button, If Your Furnace Has One.
Depress the button or knob for about 30 seconds. Once you are sure the pilot light is on, release your pressure on the reset button. A goodman furnace that’s not turning on (won’t ignite) has power or gas supply issues, restricted airflow, a bad thermostat, wrong ignition sequence, a dirty pilot light hole, or a dirty or defective flame sensor.
After Waiting Five Or 10 Minutes For The Gas To Clear Out, Turn The Gas Valve To “Pilot.”.
Do you plan on doing the work yourself? Watch the pilot light on your furnace for a few minutes to ensure it stays lit. Place the lit match or ignited lighter tip at the pilot while depressing and holding the reset button or depressing the knob, as appropriate.
After A Few Seconds, The Pilot Will Light Up, Igniting The Furnace’s Burners.
How to find the pilot light. 94 reference of pilot light goodman furnace. Once you've exposed the furnace burner assembly, look toward the bottom and you should see a dial (usually red) with markings on it that say on, off and pilot.
Once The Gas Has Had Time To Dissipate, Turn The Knob To Pilot. Then, Hold Down The Reset Button And Bring The Flame Of A Long Lighter Close To The Pilot Light Opening.
When starting it gets all the way to the igniter lighting the pilot light, but not realizing that it is lit. This is usually red and should have settings for “off,” “on,” and “pilot.”. It’s possible that the gas pilot light went out originally because your furnace has an issue that needs to be repaired.